ELEGOO PLA+ Filament (Star Gray)

kr.238 við MVG

100 in stock

SKU: 077383 Category:

Description

PLA+ ELEGOO Filament (star gray)

ELEGOO filament in the shade of star gray is a versatile solution that will work well in both technical prints and decorative projects. The neutral, matte color ensures legibility of details and matches modern aesthetics. The product is based on PLA+ (polylactide plus – a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.

Drukarka 3D ELEGOO na drewnianym stole obok kolorowych szpul filamentu

Durability and precision

With increased resistance to cracking and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.

Dwie szare szpule filamentu

Convenience and compatibility

The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling – a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.

Stos kolorowych szpul filamentu 3D ułożony w dwie kolumny

 

General

Manufacturer ELEGOO
Model 50.203.0163
Color Star gray
Weight 1 kg

 

Recommended print settings

Drying settings before printing 55 ± 5°C
Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)
Nozzle temperature 200 – 230°C
Table temperature (depending on printer and surface) 35 – 65°C
Type of working surface Textured PEI (polyetherimide – a durable material that holds prints well) or other compatible plates
Printing speed Less than 280 mm/sec

 

Physical properties

Density 1.30 g/cm³
Melting point 161°C
Deflection temperature under load 56°C
Softening temperature (Vicat test) 63°C

 

Mechanical properties

Tensile strength (XY – measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 2 MPa
Elongation at break (XY) 7,9% ± 1,6%
Bending strength (XY) 74 ± 4 MPa
Bending modulus (XY) 2979 ± 156 MPa
Impact strength (XY) 65.5 ± 3.6 kJ/m²

Legg í kurv